10 BMW EDC17C41/CP45 control unit protective caps
US $0.00Used to close the holes after using the drilling tool (MAGP0.5.11). The kit consists of 10 pcs.
Showing 1–16 of 134 results
-
-
-
6 pcs set of pin adapters
US $120.00Pin adapter kit for connections between FLK35 and ECU / TCU pins
-
Bench connection cable for ACM2.x
US $140.00This cable allows you to connect to AdBlue ACM2.x control modules installed in Mercedes buses and trucks.
Main features:
for ACM2.x modules
safe connection
minimal risk of error -
BMW ZF 6HP Continental TCU cable
US $125.00Il cavo FLX2.21 consente il collegamento alle centraline delle trasmissioni automatiche BMW ZF 6HP Continental.Principali caratteristiche:- modalità Bench- maggiore velocità comunicazione- connessione sicura- rischio di errore minimo
-
-
BootROM cable for CM2100A Cummins
US $190.00The BootROM cable for CM2100A Cummins ECUs is designed to ensure stable connections between Dodge control units and Flex. Main features: Bench connection Restore of locked or non-working ECUs Full programming of the firmware Direct communication with the unit bypassing the operational firmware Low-level access to the ECU Fast and safe procedure via Flex “Enable BootROM” function Buy now, shipping from May 5th.
-
BootROM Cable for Cummins CM2150C and CM2150E
US $190.00The BootROM cable for Cummins CM2150C and CM2150E ECUs is made to connect Flex in Bench to heavy-duty vehicles equipped with CM2150C and CM2150E control units. Main features: Bench connection Restoring locked or broken ECUs Firmware full programming Direct communication with the unit bypassing the operational firmware Low-level access to the ECU Fast and safe procedure via Flex Enable BootROM function Buy now, shipping from May 5th
-
BootROM Cable for Cummins CM2200A CM2200B
US $145.00The cable for CM2200A and CM2200B Cummins ECUs enables Bench operations on heavy-duty vehicles from different brands with Flex. Main features: Bench connection access to BootROM mode recovery of blocked or damaged control units full firmware programming direct communication with the unit bypassing the operational firmware low-level access to the ECU Buy now, shipping from May 5th
-
BootROM cable for Cummins CM2220A, CM2220B, CM2220C
US $145.00The cable for CM2220A, CM2220B, and CM2220C Cummins ECMs is designed to perform bench operations with Flex. Main features: Bench connection Enable BootROM function available for locked ECMs Full programming of the firmware Direct communication with the unit bypassing the operational firmware Low-level access to the ECU Buy now, shipping from May 5th
-
BootROM Cable for Cummins CM2250
US $190.00The cable for CM2250 Cummins ECU enables connections between the control unit and the Flex programmer. It also allows you tu use the BootROM mode. Main features: Bench connection safe and quick ECU recovery via the Enable BootROM function full firmware programming direct communication with the unit bypassing the operational firmware low-level access to the ECU Buy now, shipping from May 5th
-
BootROM Cable for Cummins CM2350A CM2450A
US $145.00The cable for CM2350A CM2450A Cummins ECUs enables Bench operations on heavy-duty vehicles with Flex and access to the BootROM mode. Main features: Bench connection access to BootROM for ECU recovery full firmware programming direct communication with the unit bypassing the operational firmware low-level access to the ECU Buy now, shipping from May 5th
-
Cable for GPEC4, GPEC4LM, and GPEC5 FCA/Stellantis ECMs
US $159.00The FLX2.88 cable enables bench programming connection for GPEC4, GPEC4LM, and GPEC5 engine control modules via the Flex programmer. Compatible with numerous FCA and Stellantis vehicles produced from 2018 to 2024, it ensures safe and reliable connections for ECM reading and writing operations. Key features For GPEC4, GPEC4LM and GPEC5 engine control modules Supports bench programming via Flex on FCA/Stellantis vehicles from 2018 to 2024. Fast and secure connection for chiptuning operations
-
Challenger clip
US $0.00It can be used to connect the boot pad directly to the microprocessor (for example TC1793 used in FIAT MED17C69 or FIAT MED17.3.3).
-
Connection Cable DENSO_xx Ecus
US $125.00The cable allows connection to DENSO engine control unit.Main features:● Bench connection mode● Ease connection● A faster connection between ECU and FlexBox● Reduces the risk of error
-
