Connection cable: FlexBox port C to NEC 7F00 XX
US $15.00Flat connection cable 35cm for FlexBox C port to NEC7 F00XX
Showing 33–48 of 134 results
-
-
Connection cable: FlexBox port D to BDM MPC5xx
US $15.00Flat 35cm connection cable for FlexBox D port to BDM MPC5xx
-
Connection Cable: FLEXBox port F to VL381
US $125.00This Cable connects VL381 to the B/F-port of FlexBox. The goal of the FLX2.52 Cable is to obtain A secure connection mode.
-
Connection Cable: Simos PCR2.1
US $125.00The cable allows connection to Simos_PCR2.1 ECU.
Main characteristics:
– Bench mode
– higher communication speed
– secure connection
– minimal risk of error -
Connection Cable: Toyota GEN 3 ECU cable
US $125.00The cable allows connection to Toyota Gen 3 engine control unit.
Main features:
● Bench connection mode
● Ease connection
● A faster connection between ECU and FlexBox
● Reduces the risk of error -
Drilling tool for BMW EDC17CP41/45 ECUs
US $0.00This device minimizes risk of damage to the compatible control units during operations.
-
Dual-Mode – Dynomag Hub
US $2,500.00Dual-Mode for Dynomag Hub is the ideal solution for those professionals looking for more power in high-performance vehicle testing, including high-horsepower hypercars. Main features: Tests up to 1400 Hp @2000 rpm Higher precision in extreme tests Dedicated software license Additional kit with components to assemble PLEASE NOTE: in order to enable the Dual-Mode, purchase the dedicated software license, then add the hardware kit. You can add it to the cart during checkout operations.
-
Dual-Mode Kit – Dynomag Hub
US $1,000.00Dual-Mode for Dynomag Hub is the ideal solution for those professionals looking for more power in high-performance vehicle testing, including high-horsepower hypercars. Main features: Tests up to 1400 Hp @2000 rpm axle rpm Higher precision in extreme tests Kit with components to assemble Dedicated software license PLEASE NOTE: in order to enable the Dual-Mode, purchase the dedicated Software license + the Hardware kit. You can add the Software license to the cart during checkout operations.
-
Dynomag Hub – Dyno for 2WD/4WD vehicles
US $52,490.00Dynomag Hub is Magicmotorsport’s car dyno capable of precise and repeatable tests. Robust and made with a meticulous combination of electronic, technical and structural components, it consists of a control totem and 2 or 4 hubs to be coupled directly to the wheel hub of the vehicle. It doesn’t need to be installed permanently, it can actually be stored anywhere after its use. Main features: Small size Precise and repeatable measurements High levels of safety during tests Made in Italy
-
ECU Connection Cable Continental Simos8.xx
US $125.00This Cable allows to interface some types of ECU with FlexBox.
-
ECU Connection Cable for EDC17C50
US $125.00The cable allows connection to EDC17C50 ECU.Main characteristics:- Bench mode- higher communication speed- secure connection- minimal risk of error
-
ECU Connection Cable for EDC17C69
US $190.00Main characteristics:
– Bench mode
– higher communication speed
– secure connection
– minimal risk of error -
ECU Connection Cable for EDC17CP10
US $125.00ECU Connection Cable for EDC17CP10.
Main characteristics:
– Bench mode
– higher communication speed
– secure connection
– minimal risk of error -
ECU Connection Cable for SIM271DE
US $145.00ECU Connection Cable for SIM271DE Main characteristics:- Bench mode- higher communication speed- secure connection- minimal risk of error
-
ECU Connection cable for SIM271KE
US $145.00ECU Connection Cable for SIM271KE. Main characteristics:- Bench mode- higher communication speed- secure connection- minimal risk of error
-
ECU Mask
US $310.00ECU Mask is the solution for fast and safe bench programming. Thanks to the mini card system, you eliminate the risk of damaging the control unit.Main characteristics:- bench connections- quickly connected to the ECU- avoid wrong connections- over 100 ECUs supported