EDC17CP55 Flash Tune for Land Rover TDV6, L494 Range Rover Sport, L462 Discovery and L405 Range Rover

EDC17CP55 Diesel Tune TDV6 L462 L494 L405

Price range: US $995.00 through US $1,095.00

Stage 1 tuning for Bosch EDC17CP55-equipped Land Rover TDV6 / 306DT engines. Select your preferred Stage 1 option; Stage 1 (+40hp) – Standard is the default.

SKU: N/A Categories: , , ,

Description

EDC17CP55 Stage 1 Engine Tune

Engine tuning for Land Rover TDV6 / 306DT applications using the Bosch EDC17CP55 engine controller.

  • All EDC17CP55 versions covered, including all variants.

Supported engine

  • Engine code: TDV6 / 306DT
  • Engine family: AJD-V6 / AJTDV6, Ford/PSA Lion V6 architecture
  • Displacement: 2,993 cc (3.0L), turbocharged diesel V6
  • Factory output: 254 hp / 189 kW
  • Factory torque: 443 ft-lbs / 600 Nm
  • Engine controller: Bosch EDC17CP55, Infineon TriCore TC1793

Supported USA and Canada applications

  • L462 – Discovery: model years 2017-2020
  • L494 – Range Rover Sport: model years 2016-2021
  • L405 – Range Rover: model years 2016-2021

These model years refer specifically to the supported TDV6 / 306DT engine application, not the full chassis production range. Confirm engine and ECU identification before selecting a flashing protocol.

OBD programming for Bosch EDC17CP55 / TC1793 on the supported TDV6 / 306DT applications. Connection is through the vehicle diagnostic port, with the ECU installed and its housing closed.

Supported tools

  • Magic Motorsport Flex
  • Magic Motorsport IXI
  • Alientech PG4
  • Alientech Kess3
  • Autotuner One
  • Autotuner Tool

Protocol selection: Select the supported Land Rover vehicle and Bosch EDC17CP55 protocol in your tool software. Confirm the ECU hardware/software identification and any prerequisite shown by the tool before programming. Read, virtual-read and write availability depend on the selected protocol and ECU version.

Closed-case bench programming for Bosch EDC17CP55 / TC1793 on the supported TDV6 / 306DT applications. The ECU is removed from the vehicle and connected through its external connector without opening the housing.

Supported tools

  • Magic Motorsport Flex
  • Alientech Kess3
  • Autotuner Tool

Protocol selection: Select the Bosch EDC17CP55 / TC1793 Bench protocol in your tool software. Confirm the exact ECU hardware/software identification and follow the manufacturer's connection instructions for that version.

Open-case bench programming for Bosch EDC17CP55 / TC1793 on the supported TDV6 / 306DT applications. This is the Boot / TriCore method: the ECU housing is opened for the connections specified by the tool manufacturer.

Supported tools

  • Magic Motorsport Flex
  • Alientech Kess3
  • Autotuner Tool

Protocol selection: Select the Bosch EDC17CP55 / TC1793 Boot / TriCore protocol in your tool software. Confirm the exact ECU hardware/software identification and follow the manufacturer's connection instructions for that version. This method requires opening the ECU; it is different from Bench (Closed).

Additional information

Version

Stage 1 (+40hp) – Standard, Stage 1 (+10hp), Stage 1 (+20hp), Stage 1 (+30hp), Stage 1 (+50hp), Stage 1 (Multiversion)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.